HY 4070 11gm Loctite

Instant Adhesive

LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. HY 4070 is ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).

Features and Benefits

• Temperature resistance from -40 to +100°C
• Gap filling up to 5 mm
• Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals
• Fast fixturing

Technical Information

• Application method: Dispense System
• Applications: Bonding Dissimilar Materials, Bonding Plastic, Bonding Rubber, Construction, Direct Bonding, Edge Bonding, Interior Repairs, Structural Bonding
• Cure type: Room Temperature (Ambient) Cure, Two Component Mix
• FEA (finite element analysis): Finite Strain, Viscoelastic
• Fixture time, Aluminium (etched) 0.5mm gap: <60.0 sec.
• Gap fill: 5.0 mm
• Mix ratio, by volume: 10 : 1
• Number of components: 2 Part
• Recommended for use with - omposite, Composite: Advanced Composites, Dry Surface, Elastomer: Highly Filled Elastomer, Epoxy, Fiberboard, Gel Coat, Laminate, Metal, Non-Gel Coat, Painted Surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: Cast Urethane, Vinyl, Wood
• Shear strength, Steel (grit blasted) - 25.0 N/mm² (3625.0 psi )
• Key characteristics, Mixed - Cure Speed: Ultra Fast Cure, Gap Filling, Moisture Resistant, Multipurpose
• Operating temperature, Mixed: -40.0 - 100.0 °C (-40.0 - 212.0 °F )
• Casson viscosity, cone & plate, Resin @ 25.0 °C - 200.0 - 1300.0 mPa·s (cP)
• Colour, Resin, Yellow
• Colour, Hardener, Clear
• Viscosity, cone & plate, Hardener @ 25.0 °C Shear Rate 1,000 s?¹ - 1.0 - 30.0 mPa·s (cP)